How do I test a rectifier on a 1988 Mercury 35hp outboard? - outboard test
This is a small black box about 1 1 / 2 "square with 3 terminals, the motor will not load and exhaust covers a large battery. Rectifier boat mechanic told me that c That was probably the problem, but I do not want something that does not have to buy it. thank you
Saturday, January 30, 2010
Outboard Test How Do I Test A Rectifier On A 1988 Mercury 35hp Outboard?
Subscribe to:
Post Comments (Atom)
Make sure the battery is good, first, check all cable connections for corrosion. To test the rectifier need a VOA m (Volt Ohm Amp) on the scale VOA RX1000. Rectifier Disconnect leads (two green and one red wire harness cable connection and a black wire of the motor ground)
ReplyDeleteIC testing are:
1. Place black test lead in green 1 green 2 red reading test is infinite. Now, insert the red test lead to the reading of the red should be infinite. Now, insert the red test lead, black, you should be awarded continuity.
2. Place black test lead with green 2 red green 1-receive test, should be infinity. In red should conduct tests to obtain the red infinity. Now try the red wire black head has promised to get continuity.
3. Insert the black test lead red wire instead of the red test lead Green1 to ensure the continuity now need to green2 the test driver should now be continuity awarded black passport should maintain the continuity.
4. Place wire-test black over black-red-Green1 we must now test the infinite square red test lead to green2, the test should now be given an infinite thread has the infinite.
If you are from VOA meter replacement rectiefer not reached.
NOTE: If the results are exactly opposite to that recifier is good and should be replaced. The results can occur due to the reverse polarity of the internal battery Metro VOA.
That's yer easy.